Natural Alabaster

Naturally Unique Veining

No two pieces of stone are ever the same

Alabaster is a natural stone, so every piece carries its own veining and subtle variation in color. The fixture you receive may therefore differ slightly from the images shown.

Real Photo

Power & switch

Just Step On It

The switch sits on the cord, where your foot already is. No bending down to a socket, no reaching up into a hot shade.

On and off only. To dim it, use a dimmable bulb with a plug-in dimmer.

Material Genuine Natural Alabaster Shade · Metal Base Shade built from individually cut stone tiles set edge to edge.

Finish Natural Stone White Shade · Black Base

Light source E26 socket The standard household screw base in North America. Bulb not included.

Voltage AC 110–240V

Power Plug and play — no hardwiring, no electrician Plugs into any standard wall outlet.

Control Foot switch on the cord Dimmable if you fit a dimmable bulb on a plug-in dimmer.

Cord length 150 cm / 59″ Switched plug included. Can be extended on request — ask before ordering.

Environment Indoor only

Preparation time 5–10 days Made and inspected at our own workshop before dispatch.

Good to Know

The design

A Hundred Small Pieces, Because Stone Is Honest

Nobody chose which tile would glow brightest.

Translucent alabaster almost never comes out of the ground in large flawless sheets. So for as long as people have wanted light to pass through stone — in window screens, in lanterns, in altar panels — they have worked it in small pieces and set them side by side. The Bryony shade is built the same way: dozens of squares, each cut separately, each carrying a different part of the same stone.

That constraint is what makes it worth looking at. A single large panel gives you one gradient and one set of veins. A hundred small ones give you a hundred — some coming up pale and milky, some warm amber, one or two noticeably brighter than the tiles beside them. Nobody arranged that. It is simply where each piece happened to sit in the block, and it means no two of these lamps will ever glow the same way.

Everything below the shade is built to get out of the way. The column is black, slim, and tapered, narrowing as it rises so the eye slides past it; the foot is a plain flat disc doing nothing but holding the lamp steady. Dark base, lit stone — the whole design is an argument about where you should be looking. Switched off in the afternoon, the shade still holds its honey tone against a pale wall, which is more than white fabric or clear glass can say.

Because they are real stone. The shade is made of dozens of small squares of alabaster, and each one is cut from a different piece — so some glow pale, some warm amber, and one or two brighter than the tiles next to them.

You will also see the joins between tiles when the lamp is on, like a faint grid across the shade. That is how a tiled stone shade is built. Neither of these is a fault, and it means no two of these lamps look the same.

Sit down where the lamp will stand and think about your eye level. The bottom of the shade should sit at or just above your eyes when seated — high enough that the light reaches your book, low enough that you never see under the shade into the bulb.

61″ for a low sofa or a deep armchair. 66.9″ beside a standard sofa — the safe answer in most living rooms. 71″ when the lamp stands behind the seating, or next to something tall like a high-backed chair or a bed.

No. It plugs into an ordinary wall outlet — no wiring, no junction box, no holes in anything. Unpack it, plug it in, done. It also means you can move it to a different corner, a different room, or take it with you if you move house.

There is a foot switch on the cord — press it with your foot, no bending down and no reaching up under the shade. The cord is 150 cm / 59″ including the plug, which reaches an outlet behind a sofa but not across a room, so check where your nearest outlet is before you decide where the lamp goes. Need it longer? Ask us before ordering.

Yes, but the foot switch is only on and off. To dim it you need two things: a dimmable bulb, and a plug-in dimmer that sits between the lamp's plug and the wall outlet.

Those cost very little and are sold everywhere. An ordinary bulb will not dim no matter what you plug it into — that is the most common reason people think a lamp is faulty when it isn't.

A standard E26 screw-in bulb — the normal household size in the US and Canada. Bulb not included. Choose warm white, around 2700K: cool white light fights the natural warmth of the stone and makes the shade look grey instead of honey-coloured.

Beside a chair, yes. Stone softens light rather than blocking it, so what you get is a warm pool around the lamp with no glare and no visible bulb — easy to sit next to all evening.

What it will not do is light a whole room on its own. Treat it as the lamp beside the chair, not the ceiling light. If you want more brightness, change the bulb, not the height — all three heights use the same shade, so a taller lamp spreads the same light wider rather than giving you more of it.

The base is a wide flat disc, weighted low, which is what keeps a tall narrow lamp steady. That said, stone up top is heavier than fabric, so use common sense in a house with toddlers or a large dog — set it against a wall or beside furniture rather than out in an open walkway.

A soft dry cloth on the stone, and the same on the black base. Keep water off the shade — alabaster is porous and absorbs it, leaving a mark that will not come out.

No sprays, no polish, no scouring pads. Switch it off and let the bulb cool first. Dust is easiest to catch with a dry microfibre cloth before it settles into the seams.

No — this is an indoor lamp for dry rooms only. Alabaster is porous, so damp is bad for the stone as well as the wiring. A living room, bedroom, study or hallway is where it belongs.