See It In Motion
Watch the Light Come to Life
The Corin Curved Arm Candle Chandelier is drawn in a single continuous line. Slim tubes gather into a bundled column at the centre, fall away from it, sweep outward in a wide U, and turn back upward to end in a frosted glass taper — so each arm reads as one uninterrupted gesture rather than a joint bolted to a stem. There are no cups, no bobèches, no decorative collars anywhere on it.
The idea goes back to the branched candelabra, but strips away everything that was there to catch wax. What survives is the part that always did the work: a raised flame at the end of a reaching arm, repeated around a circle. The glass tapers are frosted rather than clear, so what you see is a soft column of light instead of a filament — the visual memory of a candle without the glare of a bare bulb. Because the arms curve down before they rise, the fixture reads wide and low rather than tall, which is why it suits a long dining table better than a stairwell. Available in brushed brass for warmth or polished chrome for a cooler, more graphic read.
The Details
Good to Know
No bulbs to buy — and none to change
The LED is built into the fixture, so there is nothing to source, nothing to match across a dozen arms, and no mismatched colour six months later when one gets replaced. The trade is that it is not a bulb change at end of life — contact us if a section ever stops working and we will advise on replacement parts.
About dimming
Due to the integrated LED design, dimming is controlled via the wall switch rather than by changing the bulb; therefore, you need to use an LED-compatible dimmer. Not all dimmers are perfectly compatible with the driver, so please contact us if you require dimming functionality.
Two Sizes — and the Bigger One Hangs Higher
Not a typo. The wider version has a shallower sweep, so it takes up more table and less headroom than the smaller one.
The right answer for most dining rooms.
Over 4 ft across. Measure the room, not just the table.
Everything a Candelabra Had, Except the Wax
Take away the drip cups and see what is left.
A branched candelabra is mostly plumbing for wax. The cups, the collars, the little saucers under each flame — none of that was ever decoration. It was there to catch what melted. Remove the candles and every one of those parts becomes an ornament with no job, which is why so many electrified candelabras look fussy: they are still solving a problem that stopped existing a century ago.
Corin keeps only the part that always mattered — a light raised at the end of a reaching arm — and draws it as one continuous line. Each tube leaves the bundled column at the centre, falls away, sweeps outward, and turns back up to hold its taper. No cups, no collars, nothing capped or disguised. The shape is the structure, and you can follow any single arm from stem to flame without your eye meeting a joint.
The tapers are frosted rather than clear, and that is deliberate too: what you see is a soft column of light rather than a filament, so it reads as candlelight from the far end of a room and stays comfortable to sit under for hours. And because the arms drop before they rise, the whole thing spreads wide rather than deep — it fills a long table horizontally instead of hanging into it, which is why it works in rooms a tiered chandelier would overwhelm. In brass it warms; in chrome it sharpens. Same line, two different rooms.
Wide, Not Deep
Arms that sweep out instead of tiers that hang down — which is what lets a fixture this size live on a normal ceiling.
One Continuous Line, No Joints on Show
Each arm leaves the bundled column at the centre and runs to its taper as a single unbroken tube — no cups, no collars, nothing capped or disguised. That matters because a branched candelabra's cups were never decoration in the first place; they were there to catch wax. Take the candles away and they become ornaments with no job. Here the shape is the structure, and you can follow any arm from stem to flame without your eye meeting a joint.
Frosted Tapers Instead of Bare Bulbs
On a candle-style chandelier the lights sit at roughly eye level for anyone seated at the table, which is exactly where a bare filament is least welcome. Each arm here ends in a frosted column, so what you see is a soft shaft of light rather than a bulb — it reads as candlelight from the far end of a room and stays comfortable to sit under for a whole evening. The LED is built in, so there is nothing to source and no odd one out when a single bulb gets replaced.
Brass Where It Bears, Acrylic Where It Hangs
The decision that keeps an arm-based fixture hanging straight, and the one nobody thinks about. The tapers are frosted acrylic — and they have to be, because weight at the end of a long cantilevered arm is what pulls it out of line. Acrylic is a fraction of the weight of glass, so every arm holds its sweep, and it survives a knock during installation instead of becoming a replacement part. The arms, stem and canopy are brass, where the load and the wear actually are: it holds a long curve without flexing, and being non-ferrous it will not rust the way painted steel does once a chip exposes the base. Choose gold, black, or nickel.
— Brass arms, frosted tapers, and a light that spreads instead of drops —
Why Brass & Acrylic
Two materials doing two different jobs. On a fixture with arms this long, that choice is what keeps it hanging straight.
Common Questions
Frosted acrylic — and that is on purpose, not to save money.
Each taper sits at the far end of a long curved arm, and weight out there is what makes an arm droop over time. Acrylic weighs a fraction of what glass does, so the arms hold their sweep and the fixture keeps hanging level. It also survives a knock during installation, where glass would be a replacement part and a delay.
No — the LED is built into the fixture. Nothing to buy, nothing to match across a dozen arms, and no odd one out six months later when a single bulb gets replaced with a different brand.
The trade-off is honest: at the end of its life it is not a bulb change. Contact us if a section ever stops working and we will advise on parts.
A soft dry cloth, or barely damp for fingerprints on the metal. Then dry it.
Be gentler with the tapers than you would with glass: no paper towels, no scouring pads, and no ammonia-based glass sprays. Those craze acrylic and the marks do not polish out. Twice a year is plenty.
The Complete Installation Guide
Not sure how to wire it, how high to hang it, or whether you need an electrician? Our full guide walks through every step for US homes.
Power Off First
Switch off at the breaker and confirm before you touch any wiring.
Check the Box
Make sure your junction box is standard, secure, and rated for the weight.
Match the Wires
Black to black, white to white, ground to ground — the US standard explained.
Set the Height
Mounting heights and clearances for sconces, pendants, and chandeliers.
Free guide · Written for US homes · Opens in a new tab
Where the Material Does the Work
The pieces we take the most time over — natural stone, hand-formed glass, hammered metal, cut crystal. Four fixtures, four completely different things happening to the light.
Raindrop Linear Chandelier
Glass · 1–36 heads · Brass, Black, Nickel
Glass droplets on slender cords, throwing small halos across the ceiling. The most reviewed piece in the series, and the easiest way into it.
Hammered Cylindrical Lamp Arm Chandelier
Hammered metal · 4–17 heads · Gold, Black
Dimpled, hand-worked arms that scatter light where a smooth surface would just reflect it. Seven sizes, round or linear, from a breakfast nook to a lobby.
Crystal Ball Round Cluster Chandelier
Cut crystal · Round cluster
Clustered crystal spheres, each one splitting the light into small points of colour. The only fixture in the group that throws spectrum rather than glow.
Alabaster Rivage Round Chandelier
Natural stone · ∅ 15.7″–59″ · 16 reviews
A flat ring of natural alabaster, only 2.8″ deep — the one to choose when the ceiling is low but you still want stone. Also as two- and three-ring versions.
Electrical Specifications
| Light Source | Please contact us to confirm this model’s light source. |
|---|---|
| Voltage | Configured for the destination country. Please confirm the rated voltage for this model before ordering. |
| Global Electrical Options | Voltage and bulb base, where applicable, are configured for the destination country. Please confirm the available US, EU, UK, AU or other regional configuration before ordering. |
- Is professional installation required?
- Yes. Hardwired fixtures should be installed by a licensed electrician in accordance with local codes.
- Can the voltage be customized?
- Voltage can be customized to suit your country's electrical standard. Contact us before ordering to confirm the required voltage.
- How long does delivery take?
- Standard sea freight is estimated at 25–35 calendar days after dispatch. Express delivery, when available, generally takes 7–14 business days after dispatch. Production and preparation time are additional.
- What if the fixture arrives damaged?
- Contact us as soon as possible after delivery with photos of the fixture, packaging and shipping label. Our team will review the issue under our Shipping and Refund Policies.
- How should I clean the fixture?
- Switch off the power and allow the fixture to cool. Gently dust with a soft, dry microfiber cloth. Do not spray cleaner directly onto the fixture.
- Can I return it?
- Eligible unused, uninstalled items may be returned within 60 days of confirmed delivery. Please review our Return & Refund Policy before ordering.
Size
∅ 37.8″ × H 34.6″; ∅ 50″ × H 26.8″
Colour
Gold; Black; Nickel
- Preparation time is confirmed for your order before dispatch.
- Standard Delivery — Sea freight: 25–35 calendar days after dispatch; production and preparation time are additional.
- Express Delivery — 7–14 business days after dispatch when available; preparation time is additional.
- 60-Day Returns — Eligible unused, uninstalled items may be returned under our policy.
- Secure Packaging — Fragile lighting is carefully packed for safe delivery.
Add your item to the cart, proceed to checkout, enter your delivery details, choose an available shipping method and select your preferred secure payment option. Available payment methods vary by country and device.
How to Place an Order
Simple 5-Step Checkout Process
- 1
Add to Cart
Choose your favorite item and click “Add to cart”.
- 2
Check Out
Review your shopping cart and continue to checkout.
- 3
Fill in Address
Enter your shipping address and contact details.
- 4
Choose Shipping & Payment
Select from the shipping and payment options available at checkout.
- 5
Pay & Wait for Delivery
Complete payment. We will send you shipping updates when your order is on its way.
Corin Curved Arm Candle Chandelier
Watch the Light Come to Life The Corin Curved Arm Candle Chandelier is drawn in a single continuous line. Slim tubes gather into a bundled column at the centre, fall away from it, sweep outward in a wide U, and turn back upward to end...
